Salta al contenuto principale

Model No. A1367 / 8, 16, 32, or 64 GB capacity

913 Domande Visualizza tutte

How do I install an on/off flex cable?

I was replacing my screen on my ipod touch 4th generation. I realized that I had pulled my on/off flex cable to hard and I broke it. I have bought a new one and I am wondering how do i connect it to the connections on the main board?

solder?

adhesive?

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
1 Commento

i'd love to know the answer to this... please let me know what you come across

da

Aggiungi un commento

2 Risposte

Risposta Più Utile

u'll hav to definitely solder it on, but first u have to remove the main board(pcb) to have enough room to do the job. remove the old on/off flex by unscrewing the 2 screws on the top right power button,reheat the flex for few seconds to remove it easily by heat gun and then remove the 3 screws on the volume button there u can take it off. replace the new on/off flex the same way. assemble the rest of the board and solder the flex. hope this will help.

Questa risposta è stata utile?

Punteggio 1
Aggiungi un commento

well you definitely have to solder it on. I'm doing mine right now and I have to clear off the old solder and crap from the 4 solder points. However, they are super tiny so have a good soldering iron and and Exacto knife. Then you'll have to resolder the new one onto the board.

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

Spencer sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,422