RISOLTO: Bios adapter for 820 00875 - MacBook Pro 13" Function Keys Late 2016

Bios adapter for 820 00875

Any idea where I could purchase a QFN8 to DIP8 Adapter that will fit a bios chip off the 820 00875 board. The only one I have and can find is this but it is too big.

I am using the Mini Pro TL866CS

Thanks

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio 1

Postato: 9 set 2019

Opzioni

Is this what you are looking for?? QFN8 MLP8 WSON8 U-PDFN8 probe Programming Socket 8pad IC Test Socket Pitch 0.8mm Clamshell Chip Size 43 Flash Adapter Burn in Socket

Questa risposta è stata utile?

Sì No

Punteggio 0

2 Commenti:

Thanks Dan. I think that one is 4x3mm I did find one by pasting your link into google that is 3x2mm which is the size of the bios chip but they are expensive. I was hoping to find just the board for a couple of dollars and just solder the chip to it but I gather they don’t make the adapter boards that small. Might be cheaper and quicker to run jumper wires from the chip to the adapter I have.

9 set 2019 da Chris Stables

The chips are still getting smaller and its getting harder!

Pin arrays require these sockets and as the marketer them is so small they are expensive!

10 set 2019 da Dan

Aggiungi un commento

MacBook Pro 13" Function Keys fine 2016

Bios adapter for 820 00875

1 Risposta

Aggiungi la tua risposta