Salta al contenuto principale

Revamped version of the iPhone 3G with faster processing speeds. Repair of this device is similar to the 3G, and requires simple screwdrivers and prying tools. Model A1303 / 16 or 32 GB capacity / black or white plastic back.

1482 Domande Visualizza tutte
Domanda Chiusa

Connector 1 broken, new LCD or entire display?

I replaced the battery in my 3GS., but I think I damaged connector 1 in the process. The phone makes a noise when I plug it in and I can hear new message indicator but the screen is completely black. Can i just get a new LCD? or do I need to get a whole new front?

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

2 Risposte

Risposta Più Utile

Try Reset, hold together Home and Power buttons for about 15 seconds until iPhone turns on. See if that helps. If not, make sure 3GS is OFF before and during all repairs. Try to carefully reseat Flex Cable #1 again. If you decide, then yes, you can just replace the LCD display. Also be sure to buy LCD display for 3GS.

Questa risposta è stata utile?

Punteggio 1
Aggiungi un commento

Agreed, you probably just need a reset.

Questa risposta è stata utile?

Punteggio 1
Aggiungi un commento
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,505