replace my digitizer screen now the screen won't light up
replace my digitizer screen now the screen won't light up but if I plug it on to a monitor i can see it?
Questa è una buona domanda?
Punteggio
0
550046
2 Risposte
Soluzione Prescelta
Rep: 159,7k
11
191
368
Did you disconnect the battery before installing the replacement screen?
Questa risposta è stata utile?
Punteggio
3
No, I did not.
That usually means the backlight fuse has blown. Shine a flashlight behind the apple logo of the screen and see if it displays a image on the screen while it's on.
If yes the macbook will need to be taken to a reputable macbook repair shop to get it fixed.
Try reseating the display cable with the battery unplugged and see if that helps.
Thank you and have a good day.
I feel dumb, I thought this was a MacBook air sorry.
Rep: 28,4k
9
13
64
You may have just missed a cable. At least graphics card works as mionitor works.
Go over the steps again, slowly with good light. Some times the little ribbon cables can be tricky.
Questa risposta è stata utile?
Punteggio
2
Thanks a lot.
