Salta al contenuto principale

Released in North America in November 2006.

199 Domande Visualizza tutte

What happens if you plug in a 110v wii into 220v?

I have an American Wii, its 110v and I moved to Saudi Arabia and I accidentally plugged it in without a converter. It made a lot popping sound and even when I plug it in a 110v converter it would not work so I opened up the power brick and saw some small yellow stains on the board.

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

Batterie per PC portatili

Una soluzione semplice per un grande aumento di potenza.

Acquista ora

Batterie per PC portatili

Una soluzione semplice per un grande aumento di potenza.

Acquista ora

1 Risposta

Risposta Più Utile

When you connect a device to a voltage higher than it’s rated supply voltage, it over-stresses the circuit inside the device. By doubling the voltage from 110 upto 220V you have also forced through much more current into the device. Chances are that 2 x voltage blew some components inside before the excess current would have over- cooked the the circuit inside. If a component has stained the board, chances are that’s what got stressed and broken down inside. The yellow stains maybe insulation from a component or transformer indicating the defect component. An electronics repair shop maybe able to help or seek out a replacement power brick? Hope this helps?

Questa risposta è stata utile?

Punteggio 1

Commenti:

My cousin used to burn out her American hairdryers on UK mains supply all the time until she bought one specially to use in the UK and Europe.

da

Aggiungi un commento

Aggiungi la tua risposta

yusuf ahmed sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 15

Ultimi 30 Giorni: 54

Tutti i Tempi: 223