Why is my Bose Companion 2 Series II power adapter need bend to work?

Hi All!

My Bose Companion 2 Series II works, but the AC adapter connector needs to be bent with a finger right by the port on the speaker to work. I imagine it is a bad connection with the port. Is there a way to repair the port to not require my constant holding it in place?

Merry Christmas!

Thank you in advance!

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

Sfoglia il Nostro Negozio

1 Risposta

Risposta Più Utile

Hi @picasso ,

It may be a loose connection or a faulty power socket.

Here’s a link to a not very good video that shows how to disassemble the speaker so that access to the interior components is possible.

Once you have access you can inspect the power socket connection to determine what the problem is, i.e. whether it is a loose connection or if the socket itself is faulty (you may have to use an Ohmmeter to prove this) and needs to be replaced.

Here’s a link to just one supplier of replacement sockets.

If the socket is the problem, as I do not know the specifications of the socket, you may have to search further for the correct type if the link doesn’t show the correct one. Be aware that these sockets are very close in diameter, being 2.1mm and 2.5mm, so this makes it awkward when trying to obtain the correct part.

Questa risposta è stata utile?

Punteggio 1

Commenti:

@jayeff Thank you! It seems to work fine if you put a pen between the power and audio cables. So far so good. Thank you again!

da

Aggiungi un commento

Aggiungi la tua risposta

Paul sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 9

Tutti i Tempi: 32