Rep: 193
3
9
Hi all
I have stupidly damaged the home button flex on a Iphone 7 and now will not work, after a close inspection of the flex I can see under magnification the tiniest of cut on the flex just before the flex bends close to the FPC connector, so if I replace the whole part will it function as a normal home/return button but without the fingerprint ID scanner?.
Colin.
Questa è una buona domanda?
Rep: 1,8k
3
there are some people on ebay who claim to beable to repair the homebutton flex, a very tricky job!
Questa risposta è stata utile?
Rep: 635
6
6
1
if you replace the home button it wont work as a home button and touch id wont work. there is however a special charge port you can buy and install that will allow the home button function to work just not touch id. https://www.unionrepair.com/new-charging...
or you can bring it to apple for a screen repair and they will fix the home button in the process.
Questa risposta è stata utile?
Rep: 377
5
4
There is a new homebutton that you can use that has the click function (home) but touch id dosent work, dosent need to change the charging port to use the newest replacing homebutton, just replace the homebutton.
If you want touch id to work a part of the flex cable need to be changed (microsolder)
Questa risposta è stata utile?
Rep: 193
3
9
Sent it off and had a micro-solder job done on it last week so that the touch ID would work again, all good now!
Questa risposta è stata utile?
Ultime 24 Ore: 0
Ultimi 7 Giorni: 0
Ultimi 30 Giorni: 5
Tutti i Tempi: 108
Sent it off and had a micro-solder job done on it last week so that the touch ID would work again, all good now!
da colin