Salta al contenuto principale

Rilasciato il 16 settembre 2016. Modello 1660, 1778. Disponibile come GSM o CDMA / 32, 128 o 256 GB / Rose gold, gold, silver, black e jet black.

2261 Domande Visualizza tutte

iPhone 7's 3D touch features and Touch ID not working after repair

My iPhone turned off and would not charge anymore. I checked the Lightning jack and cleaned it out but that didn’t help. I took it to an independent repair guy to have it checked.

The iPhone turned on and is charging but the home button was not responding and 3d touch (force touch) and touch ID weren’t working.

Is this normal?

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

1 Risposta

Soluzione Prescelta

You have two (potentially) separate issues here:

  1. You may have damaged the Home Button during the repair. The flex cable part of the HB is very fragile, as is the flex that runs underneath the LCD heat-shield. That would cause issues with the TouchID and click functions, depending on what kind of damage there is.
  2. The 3D Touch feature could just be a poor quality replacement screen.

Start by putting the original screen back to see if the 3D Touch issue is resolved. If it is, then you probably have a cheap or defective replacement screen. As for the HB, do a thorough inspection, preferably under magnification, to see if there is any damage to the HB or it’s flex cable and connector. The HB cannot (usually) be repaired but if the damage if to the screen flex, a new screen would resolve the problem.

Questa risposta è stata utile?

Punteggio 3
Aggiungi un commento

Aggiungi la tua risposta

Hassan Rao sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 1

Tutti i Tempi: 95