Aggiusta la tua roba Comunità Store

Model A1312 / Mid 2010 / 3.2 GHz Core i3 or 2.8 & 3.6 GHz Core i5 or 2.93 GHz Core i7, ID iMac11,3

382 Domande Visualizza tutte

Opzioni

iMac Thin red vertical line halfway on 27" display (Mid 2010)

Hi,

Has anybody experienced anything similar? The Red line appeared not too long ago - doesn’t go all the way like in other cases I have seen. Red, quite thin just above halfway up - most visible on dark backgrounds, less so on others.

pics here:

Block Image

Block Image

https://imgur.com/a/St98sc8

Mid 2010 A1312 (EMC 2390)

2.8 GHz Core i5 (I5-760)

16gb ram

Currently installed High Sierra.

The graphics card is Radeon HD 5750 - has been fine up until this appeared. No line on external display.

Any advice or direction for research is appreciated. Thanks!

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 0
2 Commenti

Did you open your system or have the system serviced?

da

Just for the ram upgrade and HDD/SSD

da

Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio
Risposta Più Utile

Opzioni

As you state the external display doesn’t show it we can surmise the issue is within the internal display assembly not the GPU logic. The OS level won’t be a factor either.

Here’s the IFIXIT guide to replace the display: Sostituzione Display nell'iMac Intel EMC 2390 da 27" and here’s the needed part [prodotto collegato mancante o disabilitato: IF174-034]

Questa risposta è stata utile?

Sì No
Punteggio 1

1 Commento:

Thanks for the help. I think I won’t bother with changing the LCD as it’s not worth the money I think at this point. Good to know though, hopefully it won’t get worse.

da

Aggiungi un commento

Aggiungi la tua risposta

Steve sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 51