Salta al contenuto principale

Lanciato il 25 settembre 2015. Modello A1688/A1633. Si ripara in modo simile alle generazioni precedenti, richiede cacciaviti e strumenti di apertura. Versioni GSM o CDMA /16, 32, 64, 128 GB / Oro rosa, Oro, Argento, Grigio siderale.

2682 Domande Visualizza tutte

No display after replacing charger port

I have an iPhone 6s. It would only charge if I bent the lead so I ordered a replacement charger port. I stripped the phone and fitted the new part but now my phone won't turn on. Well, I think it's on because I hear alerts but nothing on the screen. I thought it may be a problem with the screen but nothing shows up in itunes either. If I hold home/power itunes then says it needs to update. I updated it and it says it would show after update/reboot but doesn't.

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 1
Aggiungi un commento

1 Risposta

Risposta Più Utile

Were you careful to disconnect the battery before reconnecting the screen? I’m going to guess “nope, didn’t know you had to do that” in which case this is classic iPhone 6s backlight problem. Head to your friendly local microsolderer or mail in repair service to get your logic board fixed up for blown backlight filter.


Jessa

Questa risposta è stata utile?

Punteggio 3

2 Commenti:

All the tutorials I watched re-connected the battery before connecting the screen

da

You can't believe everything you see on the internet ;>). Trust Jessa, you want to disconnect the battery before playing around with the screen connectors. Check out the iFixit guide, it clearly shows the battery being disconnected early on in the process.

IIRC, Jessa was advocating for this addition to all the guides several years ago.

da

Aggiungi un commento

Aggiungi la tua risposta

ph4ntom99 sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 77