Rep: 1
3
Picture of what i think is a weird solder joint on mxm slot imac 24" http://twitpic.com/4v1e5i http://twitpic.com/4v1e6o
What do you guys say? Should it look like this?
The thing is that my 8800GS fried and my newly bought 2600 pro also kind of fried ( could be due to bad thermal paste from factory as well ).
Questa è una buona domanda?
Rep: 36,9k
150
91
50
That's definently not normal. It might be why your cards fried. (Or they just aren't working because of the slot) Did the cards work for a period of time, or did they not work at all? You might be able to remove that with a fine-tipped soldering iron, or you may be able to scrape it off with an exacto knife.
Questa risposta è stata utile?
Don't use an exacto knife you can cut the traces to the pins. Clean it before using a solder iron. Don't use a solder iron to clean with out flux.
Hi guys, long time..
I bought a new iMac 21.5" and the old one is just collection dust :(.
I am thinking about change the mxm connector or just try to fit an old laptop mother board. Does any one know where to find a spare mxm connector?
Ultime 24 Ore: 0
Ultimi 7 Giorni: 0
Ultimi 30 Giorni: 0
Tutti i Tempi: 1,250
