Opzioni

iPhone SE battery drain and hot display connectors

Hello,

A few weeks ago, my iPhone SE randomly started becoming hot, and the battery drained really quickly (3hrs) I replaced the screen, battery and proximity sensor as well as cleaning the logic board but it still gets warm and overheats near the display connectors for no apparent reason.

Any ideas? The pins don’t look damaged.

Edit: It looks like more heat than usual is also coming out the CPU, I have tried a full reset and still no results

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio 0

Aggiungi un commento

Postato: 27 set 2018

Opzioni

I would start by testing a bare-bones setup. Start by disconnecting the battery first (always!). Then disconnect the digitizer, LCD, front camera, rear camera and home button extension flex. Now re-connect the battery; you should only have the battery and Lightning Dock flex connected. Connect a known-good, preferably Apple-original Lightning cable to an iTunes enabled computer. This will boot the device and then you can check for heat. If the heat signature is much better, then add back in one flex at a time (always disconnect the battery each cycle!). If the board is hot even with a bare bones setup, you probably have a logic board issue.

Questa risposta è stata utile?

Sì No

Punteggio 1

Aggiungi un commento

iPhone SE

iPhone SE battery drain and hot display connectors

1 Risposta

Aggiungi la tua risposta