Rep: 13
1
The CD spins for a few seconds and then it stops. Then I get an unrecognized disc error. I have replaced the ribbon cables that attach to the motherboard and nothing.
Can anyone help me?
Questa è una buona domanda?
Rep: 1,7k
11
6
2
You need to use the orginal motherboard that was with that replacement drive.
Questa risposta è stata utile?
Rep: 67
3
sounds like the drive itself is bad
Questa risposta è stata utile?
If this is the case the Bluray laser in the drive will need to be replaced.
This is done by keeping the original drive board that came with the console and transferring that to a replacement Bluray drive and use that.
agreed. keeping the original board is very important. won't work without it
If your drive still doesn’t work after replacing it could be the fuse on motherboard.
Search google & replace the F6202 fuse (check the others near it as they could be a problem also).
This fixed it for us. No new drive or motherboard needed.
Questa risposta è stata utile?
Ultime 24 Ore: 0
Ultimi 7 Giorni: 0
Ultimi 30 Giorni: 4
Tutti i Tempi: 195
