Salta al contenuto principale

Lanciato il 25 settembre 2015. Modello A1688/A1633. Si ripara in modo simile alle generazioni precedenti, richiede cacciaviti e strumenti di apertura. Versioni GSM o CDMA /16, 32, 64, 128 GB / Oro rosa, Oro, Argento, Grigio siderale.

2682 Domande Visualizza tutte

iPhone 6S rear camera and flash issue (microsoldering)

Hello, i have iPhone 6S with minimal water damage. Rear camera and flashlight wont work. Tried changing camera.

After inspection i saw water damage near camera controller and FL3202 was completely burnned.

Changed U3200, C3210, FL3202, U4100

Camera and flash still doesnt work. What should i do now? have anyone faced this problem?

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

1 Risposta

Soluzione Prescelta

Check to make sure you have continuity between the PP_VCC_MAIN that goes to FL3202 and the PP_VCC_MAIN that powers the rest of the board. I’ve seen cases where the inner trace that connects the CPU area with PP_VCC_MAIN and the camera area gets vaporized internally.

Questa risposta è stata utile?

Punteggio 2
Aggiungi un commento

Aggiungi la tua risposta

Madness sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 202