iPhone se won't turn on
My iPhone SE won't turn on. It did not get wet. Tried the usual tricks (i.e. multiple cables, chargers, held down power and home buttons for long time, verified no debris inside lightning port, etc). I expect something died inside. The phone was dropped plenty of times over the years (but in an otterbox) but no event seemed to come just before the failure. But, shaking the phone I did hear a little rattle.
Could be many possible things. Perhaps the power/standby button went bad? Any ideas how to troubleshoot what actually went bad?
I've disassembled and replaced parts of other phones in the past so I took the phone apart. I don't see anything obvious.
I'd love to at least recover the pictures from this device. Assuming the logic board is still good, could I just put it into another iPhone SE and do that? I could possibly buy a used iPhone SE for not-too-much money.
Thanks for any tips!
Questa è una buona domanda?
1 Commento
My Iphone se 1st gen will not turn on it has a black screen and is unresponsive I have tried everything such as holding the home and power button but nothing has worked this is a new phone and I got it in december.
da Kanari Craig-Campbell