Salta al contenuto principale

Guide e supporto per varie marche e tipologie di televisioni (TV).

9048 Domande Visualizza tutte

No picture popping sounds when I press any button

Block Image

I have a Magnavox model 47MF439B/F7. I replaced all the electrolytic capacitors and tested all the diodes and decided to pop it back in and test it. I get no picture but when I press the power button or the menu button I get a popping sound through the speakers. The motherboard has a blue LED in the center and it flashes while the TV is plugged up, on or off. I can see a picture if I hold a flashlight up to the screen. I'm going to check all the transistors and await your insights. I much appreciate your time.

I replaced the caps because several looked like they were about to give birth.

Also on the main board a green LED flashes. Standby button on TV flashes but stand by voltage on power board is good.

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

1 Risposta

William Locke  not sure why you went ahead to change all capacitors but it will help if you can show us the boards. Use this guide Aggiungere immagini ad una domanda to post some good images with your question. Right now, I would suggest that you measure the input and output of your power board and see if the main board gets the signals it needs. The sound that you hear may just be some brief power going to the main board and from there to the speakers. You do need to measure the connectors first so you know what your TV actual tells you.

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

William Locke sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 24