Salta al contenuto principale

The DualShock 4 CUH-ZCT2 was announced in 2016 to replace the CUH-ZCT1 controller released in 2013. This controller is similar to the previous model.

224 Domande Visualizza tutte

Will the JDS-040 fit on my ps4 controller when mine has JDS-050?

My Controller model is CUH-ZCT2U and the model of the port is JDS-050 so i wanted to make sure before i bought anything that might not fit, and if i do need JDS-050, where could i find one ive looked everywhere but i cant find it.

JDS-050:

Block Image

Block Image

JDS-040:

Block Image

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 2
Aggiungi un commento

1 Risposta

Risposta Più Utile

I am in the same boat, need a jds-050 usb board and all I can find is the jds-040 board.. I'm gonna just order that one, the pin connectors are the same and had seen a wire diagram where they match the same, I am thinking the jds-050 was either an upgraded board or maybe a differnt manufacturer.

Questa risposta è stata utile?

Punteggio 1

3 Commenti:

Same problem. Already tried a jds-040 board. It is not compatible.

da

so either buy a new controller or wait till they release the jds-050 to consumers

da

I have a CUH-ZCT2U (5th gen) and my controller has a JDS-055 board. My controller works when connected to USB but will not charge. I bought a JDS-040 board by mistake. The JDS-040 can be installed in the controller but the ribbon connector is on the other side and requires the ribbon cable be twisted to make it work. The JDS-040 does allow the controller to work over USB and the lights work but still not charging.

da

Aggiungi un commento

Aggiungi la tua risposta

BurnedSpaghetti sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 8

Ultimi 7 Giorni: 24

Ultimi 30 Giorni: 119

Tutti i Tempi: 4,676