Salta al contenuto principale

Introduced in March 2009, The Mac Pro (Early 2009) introduced Intel's Nehalem architecture to Apple's professional desktop line and introduced a subtle redesigned interior that remained through the 2010 and 2012 CPU updates.

67 Domande Visualizza tutte

4,1 to 5,1 Firmware tool saying no internet access Solved

Having an issue updating Mac Pro 4,1 to 5,1 firmware. After following the instructions for set up (disable SIP, have 1.5 pkg on the desktop), when trying to run the firmware tool I get "This program requires Internet Access. Please connect your Mac Pro to the Internet and Try Again" even though I am connected with ethernet. I can not find a solution. Firewall on the Mac is off so I am at a loss. Can anyone help? (I am new to forum posting, please forgive any errors)

Update (05/26/2018)

I discovered that the replacement router I received from my internet provider a few months ago had the firewall settings to high. I set it to a lower level and the firmware tool worked right a way. Hope this can help someone else who may encounter this problem. Thank you as well to the member who responded to my question.

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 1
Aggiungi un commento

2 Risposte

Risposta Più Utile

The information on this discussion of the problem may help solve your problems:

Installation of High Sierra 10.13 on unsupported Macs

Questa risposta è stata utile?

Punteggio 1
Aggiungi un commento

I can confirm that the issue, if you have ruled out all possible chances your internet is actually not working , is in the router. I went loco with this !

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

James sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 8

Ultimi 30 Giorni: 46

Tutti i Tempi: 583