Rep: 25
1
1
My Maytag series 2000 front load washing machine is leaking water from bottom of the drum. Looks like it is coming from behind the cement block. As pictured below.
Questa è una buona domanda?
Rep: 685,3k
3,4k
1,1k
2,6k
Cause 1
Drain Pump
The drain pump pumps water out the drain hose. If the drain pump is cracked or damaged, or if the bearings are worn out, the drain pump may leak water. The drain pump is not repairable—if the pump is leaking water, replace it.
Cause 2
Tub Seal and Bearing Kit
The tub seal might be torn, causing water to leak from the seal. If the tub seal is leaking water, water may leak through the tub seal and into the tub bearings. This can cause the bearings to fail. For this reason, if the tub seal is leaking water, replace both the tub seal and the tub bearings. Be aware that this is a complicated repair and will require disassembling most of the washer.
Cause 3
Tub Seal
The tub seal might be torn, causing water to leak from the seal. If the tub seal is leaking water, water may leak through the tub seal and into the tub bearings. This can cause the bearings to fail. For this reason, if the tub seal is leaking water, replace both the tub seal and the tub bearings. Be aware that this is a complicated repair and will require disassembling most of the washer.
Questa risposta è stata utile?
Ultime 24 Ore: 1
Ultimi 7 Giorni: 14
Ultimi 30 Giorni: 91
Tutti i Tempi: 19,559
4 Commenti
Mendy - I can't fix the leaking drum, but you better not get that tile floor soaked ! We can see the puddle in the second pic.
da Tom Shafer
I have the same problem, changed the door seal and I still have 1-2 tablespoons of water for every load.
da dkinc10
I have a Maytag front load machine MHW3000BW2, evry time I do a wash I have water on the floor near the front right side.
da Glen Douglas
I have a similar problem but it only appears when we are in the rinse cycle. the waterless level seems to be higher than I remember. how high should the water cycle be?
da Martin Goldstein