Salta al contenuto principale

Fourth generation of iPad, released November 2, 2012, available in 16, 32, or 64 GB models. Model Number A1458

217 Domande Visualizza tutte

Reconnect ribbon cable assembly

Instructions say to reverse disassembly steps. Step in question says to "flip up the retaining flap on both of the ZIF connectors securing the headphone jack cable to the logic board ... Pull the headphone jack assembly cable straight out of its socket on the logic board."

How do I push the cable ends back under the retaining flaps? They do not slide back under easily and I do not want to damage the cable.

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

1 Risposta

Soluzione Prescelta

Ah the digitizer touch screen ribbon cable, I use a bit of masking tape to guide it into the ZIF connector slot.

You can alternatively use your nail on the wavy line indent which you should see on the cable to push it in. Don't push down on the cable of course so you don't pinch it.

Questa risposta è stata utile?

Punteggio 4
Aggiungi un commento

Aggiungi la tua risposta

Stephen Svoboda sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 147