Salta al contenuto principale

Some things just don't quite fit in.

252 Domande Visualizza tutte

Aren't there supposed to be two wires connecting to the battery holder

I am trying to repair a Chantilly Singing Bear. The batteries were corroded inside the battery holder, so I cleaned it out with baking soda, but still it doesn't work. Opened it up and noticed on the red wire is attached to the battery holder, and there is a loose black wire just dangling from the circuit board not connected to anything. Isn't there supposed to be both a red and black wire connecting to it? Also, general tips on how to connect the wire back would be appreciated. I am very new to this.

Block Image

Block Image

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 1
Aggiungi un commento

2 Risposte

Soluzione Prescelta

@rblack connect the black wire (blue arrow) to the tab (red arrow) by soldering it. Use this guide to learn about soldering Come saldare e dissaldare componenti elettrici

Questa risposta è stata utile?

Punteggio 2
Aggiungi un commento

yes the black wire should be connected

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

RBlack sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 242