Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

External storage options by Seagate, usually connected by USB, available in many storage sizes and form factors.

39 Domande Visualizza tutte

How to open Seagate ST90000U2-external hdd case & remove drive

hello,

This seagate case uses 5-point screws (torx plus?), the problem is i do not know what size so as to find the appropriate driver.

any help/ideas much appreciated.

Mike

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 1
Aggiungi un commento

3 Risposte

Soluzione Prescelta

You could measure the size of the 5star or you could be a set of the screwdrivrs.Size Inch point to point [in] Metric point to point [mm]

T1 .031 .81

T2 .036 .93

T10 .107 2.74

T15 .128 3.27

T20 .151 3.86

Looks like very limited availability :) http://www.traderscity.com/board/product...

and http://www.8starshop.com/en/12-in-1-comp... I am also sure that there are many more places that have a set of those. Good Luck to you.

Questa risposta è stata utile?

Punteggio 2
Aggiungi un commento

I had a case like that; I believe I was able to remove the screws using a small flat screwdriver that was able to fit tightly enough into the screw head. Once I removed the screws, I replaced them with regular phillips head.

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

I can confirm that the screws for the casing of the Seagate ST90000U2 external HD are Pentalobe #6. You need a screwdriver PL-6 (Pentalobe #6) for these screws. I got a set of screwdrivers from a German company called Wiha, available on Amazon.

Block Image

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

grskarpat sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 26

Tutti i Tempi: 4,265