Salta al contenuto principale

Rilasciato il 16 settembre 2016. Modelli 1660, 1774 e A1785. Disponibile come GSM o CDMA / 32, 128 o 256 GB / Rose gold, gold, silver, black e jet black.

1364 Domande Visualizza tutte

iPhone Earpiece not working after replacement but camera work...

So I replaced my IPhone 7+ Screen last night. I was very careful with the flex ribbon but at time I felt a little rough with it to get it off the sticky part.

When I turn the phone on it reboots itself after a few seconds. Sometimes It will stay on for a few minutes but once you make a call there is no audio and the phone just crashes.

HOWEVER, the camera works great..

Do I have a bad flex? I feel like if the flex was bad the camera wouldn't work. I can order a new flex for $25 on amazon, I just am skeptical because half the people say they work and the other half doesn't. I don't know if the flex is bad, though the camera works, or the earpiece is bad which is causing it to crash.

I unplugged the flex so the phone can be used for the time being I just have to use speakerphone to make a call.

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

1 Risposta

Soluzione Prescelta

If the phone works fine without the flex connected, then definitely change the flex cable. You should inspect carefully, preferably under magnification. You may have created a tiny tear in the flex or dislodged the proximity sensor.

You can find the replacement guide here and a replacement part here.

Immagine iPhone 7 Plus Front Camera and Sensor Cable

Prodotto

iPhone 7 Plus Front Camera and Sensor Cable

$29.99

Questa risposta è stata utile?

Punteggio 2
Aggiungi un commento

Aggiungi la tua risposta

Tyler sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 664