It works only with one power cable

Question

iPhone 6

Introdotto il 19 settembre 2014, questo iPhone con schermo da 4,7" è la versione più piccola dell'iPhone 6 Plus. Identificato dai numeri modello A1549, A1586, and A1589.

4994 Domande Visualizza tutte

Vincenzo Amato @vincenzoamato

Rep: 11

Postato: 17 dic 2017

Opzioni

It works only with one power cable

From some days my iPhone 6 works only with one. I tried with about 20 cables and it didn’t work with 19/20 cable. I changed battery and connector assembly but I didn’t noticed any inprovements. Some time I noted that my iPhone heat up. Please consider that about 4 months ago my iPhone was in contact (not immersed) with water (with wet clothes) and I changed only display. Another important thing is that I noted that one pin on the cable is more dark than normal ones. Please help me! I don’t know what I can do now. If this cable will fail...

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio 0

1 Commento

[image|1301917] this is the only cable that works

22 dic 2017 da Vincenzo Amato

Aggiungi un commento

1 Risposta

Soluzione Prescelta

sen @zhuozhensen

Rep: 253

3

Postato: 22 dic 2017

Opzioni

Try using a cleanser or alcohol to clean the end of the socket. There may be foreign or moldy phenomena. If you clean it up or you don't work, replace it

Questa risposta è stata utile?

Sì No

Punteggio 0

3 Commenti:

I replaced the connector assembly you showed in the picture but nothing has been changed. What I can do? Do I have to clean the socket on the logic board? Please help me!

Note that when I charge my iPhone the temperature increase more than normal.

23 dic 2017 da Vincenzo Amato

First you need to troubleshoot the cause of the high temperature, is in charge will happen, so could be a faulty motherboard and tail strip line interface phenomenon, the temperature rise at the same time use the lips to touch each part of the motherboard components, you will soon find the answer, I wish you good luck!

23 dic 2017 da sen

As long as you find the elements of high temperature please take a picture and mark it to me. I will continue to analyze it for you

23 dic 2017 da sen

Aggiungi un commento

I replaced the connector assembly you showed in the picture but nothing has been changed. What I can do? Do I have to clean the socket on the logic board? Please help me!

Note that when I charge my iPhone the temperature increase more than normal. — Vincenzo Amato
First you need to troubleshoot the cause of the high temperature, is in charge will happen, so could be a faulty motherboard and tail strip line interface phenomenon, the temperature rise at the same time use the lips to touch each part of the motherboard components, you will soon find the answer, I wish you good luck! — sen
As long as you find the elements of high temperature please take a picture and mark it to me. I will continue to analyze it for you — sen

iPhone 6

It works only with one power cable

1 Risposta

Aggiungi la tua risposta