Rep: 21
2
3
Hey, I needed to replace the display of an S8 Plus. Unfortunately it doesn't charge after the replacement. The temperature is too low. I tried a new battery and the phone starts but still it won't charge and I get the same error that device temperature is too low. Any ideas?
Questa è una buona domanda?
Rep: 55
3
Hi. I had the same problem for 2 s8 and s8+. Try to assemble the whole phones, including screws, without back cover and put it in charge. It worked for me, i hope it will do it for you as well.
Questa risposta è stata utile?
Thank you! It worked for me too!
Thanks was helping to save my day. you really have to assemble before charging . superb
Rep: 159,7k
11
191
368
Charging port is most likely faulty. I take it you used a replacement display assembly which included LCD with frame and charging port with it?
I'm not 100% sure about this but the charging port model label mismatch from the phone model can cause issues e.g SM-G920I with SM-G920F for example.
Questa risposta è stata utile?
No I had to take the original charging port, but I will try another one and tell you if it worked! Thank you :)
Rep: 311
6
4
1
Check to see if you have the NFC installed
Questa risposta è stata utile?
Rep: 1
1
If you have a Samsung Galaxy S8 or S8+, there’s no foolproof way to prevent it from damage. Just get it serviced from the professional. That’s it !
Because doing all things on your own cannot get it run in the proper way.
Regards,
Gadget Genie
Questa risposta è stata utile?
Ultime 24 Ore: 0
Ultimi 7 Giorni: 8
Ultimi 30 Giorni: 37
Tutti i Tempi: 3,029
