Salta al contenuto principale

A Turbosteam iron by Morphy Richards.

15 Domande Visualizza tutte

Why is there no power to the iron. No indicator light on.

Whilst ironing the power light went off and iron stop working.

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 5
3 Commenti

I have lefty iron forgot to turn off just noticed but the iron is off and now won't work

da

I’ve a steam iron generator it’s stopped workin the light doesn’t come on no heat nothing can u help?

da

My iron won’t switch on .. change the fuse

da

Aggiungi un commento

2 Risposte

Risposta Più Utile

Many of the UK heating devices have a fuse within the plug. Carefully open the plug to gain access to the fuse. Here's an image of the plug assembly from the Morphy Richards Iron Teardown:

Block Image

While not stated you'll see the far left & right connectors are also the fuse clips. With an Ohm or continuity tester you should see these are connected (with a fuse in place), If not you need a new fuse.

Questa risposta è stata utile?

Punteggio 3
Aggiungi un commento

1. check the cord

2. there is a fuse in the steam iron press, get it replaced by service centre.

4. Thermostat is not working.

4. heating rod is damage.

Questa risposta è stata utile?

Punteggio 1

1 Commento:

Where can I get my iron seen to ? Rescaled it now won’t come on just keeps going off checked fuse new fuse in but still not coming on !

da

Aggiungi un commento

Aggiungi la tua risposta

Mornay Fourie sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 4

Ultimi 7 Giorni: 50

Ultimi 30 Giorni: 230

Tutti i Tempi: 26,574