Salta al contenuto principale

Second generation of Wi-Fi iPad, released on March 11, 2011. Model number A1395. Repair is difficult and will require heat.

250 Domande Visualizza tutte

Issues with Home and Power Button

I replaced the glass digitizer. In the process accidentally ripped off the Wifi/Bluetooth antenna. I replaced that and the glass but for some reason when I reassembled everything, the home and power button are not functional (only to turn on but not to wake or sleep). The volume and mute button still work fine.

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
2 Commenti

when you ripped of the antenna are you sure you didnt rip anything else off

da

From what I can tell, no nothing else looks out of sorts. Would you like pictures to make sure I'm not over looking anything?

da

Aggiungi un commento

2 Risposte

Risposta Più Utile

if the volume buttons work but the power button does not you have likely torn through the cable on the top right hand corner of the iPad when letting the digitiser, it can be replaced following this guide..

Questa risposta è stata utile?

Punteggio 1

1 Commento:

The home button is not working either. Do you think I may have messed up something there as well? This is my first time attempting to repair an iPad. My apologies.

da

Aggiungi un commento

You can also turn off the lock/unlock feature by going to Settings - Display & Brightness - Then turn off Lock/Unlock. This should allow your sleep/wake button to work again.

If you want to actually fix that feature, you will need to replace the power/volume flex as rayeasom mentioned.

Questa risposta è stata utile?

Punteggio 1
Aggiungi un commento

Aggiungi la tua risposta

jacob.v4 sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 47