Aggiusta la tua roba Comunità Store

Repair guides and support for riding, or ride-on, mowers, also known as lawn tractors, of all types used in tending large tracts of land.

855 Domande Visualizza tutte

Opzioni

Engine starting, but will not forward or reverse.

Hi all -

Toro Timecutter MX 5050 zero-turn lawnmower

My new lawnmower abruptly stopped today. The engine kicks on just fine, but engaging the steering handles are non-responsive. My first thought was that I ran over something that jammed a gear or something. I don't know enough about zero-turns to diagnose. Any thoughts on what I should check first?

Thanks

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 1
1 Commento

This ... We just bought ours today used it to cut around the house then had to stop for a second then nothing. Would not go forward or reverse?? Cranks fine, cutter works fine ???? Help

da

Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio
Soluzione Prescelta

Opzioni

@kadekaaz the very first thing I'd check is the drive belt make sure that it is routed properly and see if that works.

Block Image

Check your clutch to make sure it works.

Block Image

After that check to see if the control arm is properly seated on your hydrostatic drive as well as the motion control assembly.

Block Image

Toro list these as possible causes for your mower not moving:

1. The bypass valves are open.

2. The traction belts are worn, loose, or broken.

3. The traction belts are off of the pulleys.

4. The transmission has failed. (unlikely;-)

Block Image

Questa risposta è stata utile?

Sì No
Punteggio 3
Aggiungi un commento

Aggiungi la tua risposta

Kade Kaaz sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 24

Ultimi 7 Giorni: 212

Ultimi 30 Giorni: 748

Tutti i Tempi: 30,828