Screen does not turn on at all (tried replacing charging port as well)

Question

iPhone 6

Introdotto il 19 settembre 2014, questo iPhone con schermo da 4,7" è la versione più piccola dell'iPhone 6 Plus. Identificato dai numeri modello A1549, A1586, and A1589.

4994 Domande Visualizza tutte

robert7kim7 @robert7kim7

Rep: 1

Postato: 19 set 2017

Opzioni

Screen does not turn on at all (tried replacing charging port as well)

I had replaced my sister's battery recently as it was starting to lose its charge very quickly. However, in a month or so, she comes back with a broken phone that does not turn on or is recognizable to itunes either.

She told me she had used a portable fan that plugs into the bottom of the phone (a cheap chinese brand I think) which I speculated is what caused the damage to the phone. What do you guys think? Or, it's just coincidence and happened to died right after.

But anyways, so I thought it was the charging port that broke. So I replaced that, and still no luck. Also, tried hard resetting as well. If you guys could give any ideas on this, that'd be incredible!

Thanks,

Robert

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio 0

Aggiungi un commento

3 Risposte

Soluzione Prescelta

Minho @refectio

Rep: 221,4k

Refectio - Mail-in Micro-Soldering Repairs & Data Recovery

15

289

806

Postato: 19 set 2017

Opzioni

You're probably right. Cheap peripherals can draw too much current or cause voltage spikes that damage the charging circuit (Tristar).

This will have to be repaired by a shop that does micro-soldering work.

Questa risposta è stata utile?

Sì No

Punteggio 3

5 Commenti:

Thank you for the response. How much do you think it would cost to repair that?

19 set 2017 da robert7kim7

Dealing with a reputable micro-solderer will cost you about $100 - $150. Some may charge more and some less.

There are a few reputable micro-solderers who frequent this forum or you can search Google. You can check out my profile if you'd like, at the very least it will serve as a data point

19 set 2017 da Minho

@mayer @oldturkey03 not sure if this is okay...but answering a direct question. Let me know.

19 set 2017 da Minho

Robert Actually this is just the type of repair that Minho specializes in. @refectio You're fine with me, you didn't recommend yourself or post your web link (which is in your profile), right?

19 set 2017 da mayer

@refectio @mayer looks good to me as well.

19 set 2017 da oldturkey03

Aggiungi un commento

Thank you for the response. How much do you think it would cost to repair that? — robert7kim7
Dealing with a reputable micro-solderer will cost you about $100 - $150. Some may charge more and some less.

There are a few reputable micro-solderers who frequent this forum or you can search Google. You can check out my profile if you'd like, at the very least it will serve as a data point — Minho
@mayer @oldturkey03 not sure if this is okay...but answering a direct question. Let me know. — Minho
Robert Actually this is just the type of repair that Minho specializes in. @refectio You're fine with me, you didn't recommend yourself or post your web link (which is in your profile), right? — mayer

joel rakich @ripper Rep: 257 4 1 · Answer 1 · 2017-09-19T17:45:39-07:00

joel rakich @ripper

Rep: 257

4

1

Postato: 19 set 2017

Opzioni

Have you checked voltage on the battery? Maybe the new battery was junk and died already, especially if it was an ebay part. Use a multi meter on the outer pins of the battery connector. Report back what you find.

Questa risposta è stata utile?

Sì No

Punteggio 1

1 Commento:

Good point !

19 set 2017 da Minho

Aggiungi un commento