Salta al contenuto principale

Seconda generazione di iPhone. Modello A1241/8 o 16 GB di memoria/plastica posteriore bianca o nera. La riparazione è più semplice rispetto al primo iPhone. Richiede l'uso di cacciaviti e strumenti di leva e distacco con ventose.

1158 Domande Visualizza tutte

Touch Display does not work correctly

The upper 1/3 part of the touchscreen is very laggy and pretty much useless, and nearly every 20-60 seconds it acts like i touched anywhere on the screen. It can get really annoying! :/

PS: I have never seen the inside of an iPhone and i never tried to open it in any way!

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio -1
Aggiungi un commento

1 Risposta

Soluzione Prescelta

Sounds to me like the digitizer needs replacement. Unfortunately, that is a rather difficult job so unless you want to hand your device in to a repair shop I recommend you buy an already assembled fixtureboard+digitizer+homebutton. I have made good experiences with that, got mine on eBay for 32$ here:

http://cgi.ebay.de/APPLE-IPHONE-3G-TOUCH...

Doing the job yourself is easy. Follow the step-by-step guide on ifixit and use the old LCD with the new digitizer/lens. You'll figure it out!

Before doing this, i'd check out the connector 2 and see if it's damaged, so you won't be out 30 bucks in case it's not the digitizer that's faulty.

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

baboehne sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,297