Salta al contenuto principale

Introdotto il 19 settembre 2014, questo iPhone con schermo da 4,7" è la versione più piccola dell'iPhone 6 Plus. Identificato dai numeri modello A1549, A1586, and A1589.

4994 Domande Visualizza tutte

My iPhone screen wont turn on but I can still hear alerts and calls.

I replaced my battery about 3 months ago(bought the battery from theunlockr.com) and no problems what so ever. Then I dropped and cracked my screen so I went and had it replaced, I noticed two days after getting it replaced my screen on the left side was a jar and wouldn't snap closed when i tried closing it. I took it back in to the same place and the guy said it was because I had a deflated battery that I needed to change my battery. So I emailed the unlockr they sent me a new battery a few days ago. I replaced it and then I had a problem with this battery. With the new battery whenever I would completely snap close the screen the screen would go black but you could still hear alerts and calls so I had to leave the screen a jar a little to see whats on my phone screen. I took it back in to the place I got the screen from and the person tried fixing it by checking the connectors and replacing the screen with a new one and even tried a new battery and nothing but now the screen wont even turn on at all. I can still hear calls and alerts but thats it no picture. Is there anything I could do to fix it?

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

1 Risposta

Risposta Più Utile

Try turning it on and holding a flashlight to the screen. Do you see a faint image? If so, you have damaged the Backlight circuit and it can be repaired, but by an experienced and reputable Micro Soldering repair shop. You can find a local one or several of the techs here on this site perform mail in repairs

Questa risposta è stata utile?

Punteggio 1

2 Commenti:

Nope I can't see anything with the flashlight on the screen!

da

I would recommend taking it to a reputable Microsoldering repair shop. They would be able to diagnose and repair. It sounded like backlight issue, but if you dont see any faint image at all, it could be something else. The only real way of diagnosing that issue would be with a good tech with the experience and tools for any repair.

da

Aggiungi un commento

Aggiungi la tua risposta

Angela Foreman sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,137