Salta al contenuto principale

Lanciato il 25 settembre 2015. Modello A1688/A1633. Si ripara in modo simile alle generazioni precedenti, richiede cacciaviti e strumenti di apertura. Versioni GSM o CDMA /16, 32, 64, 128 GB / Oro rosa, Oro, Argento, Grigio siderale.

2683 Domande Visualizza tutte

Screen doesn't have a any output after replacement

Hi guys

I recently changed the screen on my iPhone 6s since it had cracked, but it doesn't seem to have anything come up on the screen. The phone is still working. iTunes still picks it up and everything. It's not recovery mode or anything, just no picture.

Any help would be much appreciated

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

1 Risposta

are you sure that you insert lcd flexible correctly? i have also experienced same prob and fix it by replace mainboard

Questa risposta è stata utile?

Punteggio 0

11 Commenti:

Yes I believe that I have done everything correctly. I followed the steps on this site

da

you sure lcd module is not broken or defect? or try with other lcd if not show up you should reball the chipset, if you don't have experience at reballing with hot air you can try using hair dryer

da

How do I reball the chipset? I tried with another screen and I have the same problem, but it works on another phone that i have

da

Sounds like a faulty screen or blown backlight filter.

It's almost certainly a faulty screen if the old screen was working and just cracked and still works when you plug that one back in for testing.

I assume you unplug the battery first before unplugging / plugging in other cables?

da

I used the new screen on a different iphone and it seemed to work fine

da

Mostra altri 6 commenti

Aggiungi un commento

Aggiungi la tua risposta

Shranal Kumar sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 64