Salta al contenuto principale

Lanciato il 25 settembre 2015. Modello A1688/A1633. Si ripara in modo simile alle generazioni precedenti, richiede cacciaviti e strumenti di apertura. Versioni GSM o CDMA /16, 32, 64, 128 GB / Oro rosa, Oro, Argento, Grigio siderale.

2683 Domande Visualizza tutte

Caller can't hear me after port change

I've changed the charging port on a 6s and when I checked it everything was working as it should, now the mic has stopped working on calls. I can be heard when in loud speaker and hands free only, there was a metal shim on the mic at the right of the port that I couldn't get off the old one so I hadn't replaced it. Could this be causing the issue?

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

1 Risposta

Soluzione Prescelta

I recommend testing the charging ports before install, most functionality coming from it if possible.

Sounds like a faulty charging port (main microphones on the port not working). I suppose it could of went faulty from being improperly installed (tear in ribbon cable / puncture).

I have replaced them before, but not really sure what metal shim you are referring to.

Are you referring to this in step 46:

Sostituzione gruppo connettore Lightning iPhone 6s

There is black tape covering a screw hole for a metal cover for an antenna cable.

Questa risposta è stata utile?

Punteggio 1

1 Commento:

Hi, thanks for your response. I've done loads of charging ports and never had an issue before, if you look at step 55 there is a spudger on the mic with the metal shim which was missing on my replacement charging port.

da

Aggiungi un commento

Aggiungi la tua risposta

S2i sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 4

Tutti i Tempi: 526