Salta al contenuto principale

iPod Classic 6th Generation. Model A1238 / 80, 120, or 160 GB hard drive / black or silver metal front

900 Domande Visualizza tutte

iPod Classic will not boot after battery replacement

Hello!

I've got an iPod Classic 7g thin 160GB that only holds a charge for an hour or so. I ordered a battery kit from ifixit, followed the directions exactly, and the iPod refuses to boot.

With the new battery installed, the iPod appears dead, no nothing. When I plug it in with the lock switch in the 'unlocked' position, the Apple logo faintly flashes for a nanosecond, goes dark, and repeats endlessly. Once I flip the switch to 'locked,' the screen goes blank.

I know I didn't damage anything because when I reinstall the stock battery and it boots and works fine. Could I have gotten a bad battery?

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 1
Aggiungi un commento

1 Risposta

Risposta Più Utile

@spoonland3r sounds to me like you answered your own question "when I reinstall the stock battery and it boots and works fine." thus it sure sounds like a bad battery. I would recommend you replace it once more. Please make sure that you are careful around the battery connector. This model has issues with it coming of the board. I use a L-shaped paperclip to lift the locking mechanism.

Questa risposta è stata utile?

Punteggio 1

1 Commento:

Thanks for the reply! I was careful to unclip and reclip the connector very gently with the spudger in the kit. I'll get in touch with ifixit for an RMA then.

da

Aggiungi un commento

Aggiungi la tua risposta

Eli Horyza sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 80