I have tried multiple magsafe chargers to charge my Mac, but nothing seems to work. I tried resetting the SMC and still nothing.
Do I have to replace the port entirely? If so, is it something within the realm of DIY?
Thank you
Questa è una buona domanda?
Rep: 479,1k
35
329
971
You'll need to carefully work the pathway from the MagSafe charger to the logic board. Making sure each part of the circuit is working correctly.
The first step is a good inspection of the connections. Review this Apple T/N: Apple Portables: Troubleshooting MagSafe adapters. Hopefully you have a bad connector if you do follow this IFIXIT guide to replace it: MacBook Pro 15" Unibody Late 2008 and Early 2009 DC-In Board Replacement. If the connections look good you'll need a volt meter to measure the voltage as well as schematics and board drawings for the system
Do you have access to the needed tools and are you up to doing the needed tracing. If not you might as well find someone with the skills to do it.
But before you go to deep here keep in might this system is no longer supported by Apple so its limited on what it can run for OS's & apps. So make sure you don't over spend here.
Questa risposta è stata utile?
Ultime 24 Ore: 0
Ultimi 7 Giorni: 0
Ultimi 30 Giorni: 0
Tutti i Tempi: 108
2 Commenti
Can you give us a bit more here. What is the color of the MagSafe charger is it Amber or Green? What does the onboard battery checker tell you? If you can download this gem of an app: Coconut Battery. Take a screenshot of the main screen and paste it here so we can see it too.
da Dan
There is no color coming from the indicator at all. The battery has since drained, but when it still had life, plugging in any Magsafe wouldn't affect the battery indicator in the slightest.
da david arias