How do I disassemble the power unit to replace the power cord?
I need to replace the power cord. How do I disassemble the power unit to gain access to the cord reel to replace the cord?
Questa è una buona domanda?
Punteggio
0
394581
2 Risposte
Soluzione Prescelta
Rep: 101,2k
8
172
357
Niel Dilworth, The 1st/2nd link below is the DC20/DC08 models showing cord replacement, may work for you. 3rd link is the part with a diagram. Good luck. I hope this helped you out, if so let me know by pressing the helpful button.
https://www.youtube.com/watch?v=A4vYYLw5...
Questa risposta è stata utile?
Punteggio
3
Your disassembly video was excellent. I coulnt figure out how to take it apart before seeing the video.
my dc21 motor head stops after a few seconds, especially under load.
It spins free and motor is not hot? Any idea?
I think due to me being careless, I now have no power to the motor head.
The motor head does turn if 240 volts applied to the two wires, and the tried switch wire is working fine.
I have another dc21 (not motor head) that turns on for a fraction of a second, then stops. Im guessing its the power switch.
Any ideas?
Questa risposta è stata utile?
Punteggio
0
