Salta al contenuto principale

Modello A1419 / EMC 2806 / Fine 2014 o metà 2015. Core i5 da 3,3 o 3,5 GHz o Core i7 da 4,0 GHz (ID iMac15,1); EMC 2834 fine 2015 / Core i5 da 3,3 o 3,5 GHz o Core i7 da 4,0 GHz (iMac17,1) Tutti con display Retina 5K.

566 Domande Visualizza tutte

Replace Fusion drive for a SSD

I have a iMac 27" 5K (late 2015) 1tb fusion. (1tb hdd + 24gb ssd)

So I want to replace 1TB HD to Crucial MX300 SSD 750GB.

Will I need the "OWC In-line Digital Thermal Sensor for Hard Drive Upgrade for 27" iMacs 2012 and Later"?

https://eshop.macsales.com/item/OWC/DIDI...

As I understand it, that is for Hard Drive upgrades, not needed for SSD. right ?

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

1 Risposta

Soluzione Prescelta

Yes, you still need the OWC in-line thermal sensor! It's not an issue of which kind of drive you put in.

While a SSD runs a lot cooler than an HD, the problem is the systems thermal management system depends on the input of the sensor to know whats happening. If you fail to replace it the system goes into fail safe mode running the fans at high speed and lowers the CPU's clocking.

Questa risposta è stata utile?

Punteggio 2

1 Commento:

thank you dan!

da

Aggiungi un commento

Aggiungi la tua risposta

Goyang sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 1,191