Aggiusta la tua roba Comunità Store

Complete repair manual for the PSP Go, including battery upgrade and display repair instructions.

89 Domande Visualizza tutte

Opzioni

After reassembling my PSP Go the Start & Select buttons won't work

After i disassembled and rereassembled my PSP Go to fix my power switch; i used the PSP Go Teardown guide from this website, and now both the Start & Select buttons won't work anymore; and they were working before then.

so i tried taking my psp go apart and putting it back together again while going over the teardown guide thinking i over looked something, anyone have an idea of what that might be?

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 3
1 Commento

This is how you replace it. https://imgur.com/gallery/JRRsJku

da

Aggiungi un commento

3 Risposte

Filtra per:
Più utili Più recenti Più Vecchio
Soluzione Prescelta

Opzioni

Look at the 2nd picture of step 9 in the PSP Go teardown. There is a cable that connects the buttons to the main board, it could be loose.

Questa risposta è stata utile?

Sì No
Punteggio 3

2 Commenti:

Here's a direct link to the page Aram is mentioning. PSP Go Teardown

da

thanks man, that's exactly what the issue was, i didn't see that cable cause it was hidden by joystick's ribbon cable.

da

Aggiungi un commento

Opzioni

I have the same issue, except my cable is in. Any ideas? I just had sound issue which was caused by bad fuse, which i replaced and now works but SELECT/START button doesn't

Questa risposta è stata utile?

Sì No
Punteggio 0
Aggiungi un commento

Opzioni

It comes out from the front. First detach from the motherboard and then take it out from the front. The Start/Select buttons are sticked on.

Questa risposta è stata utile?

Sì No
Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

joel c sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 16

Tutti i Tempi: 6,162