Vibration doesn't work when the phone is completely assembled.

Question

iPhone 5s

L'Apple iPhone 5s è stato presentato il 10 settembre 2013. La riparazione di questo dispositivo è simile a quella dei modelli precedenti e richiede cacciaviti e strumenti di apertura. Disponibile nelle versioni GSM o CDMA con capacità di 16 , 32 o 64 GB nei colori Argento, Oro e Grigio Siderale.

3530 Domande Visualizza tutte

ignitus @ignitus

Rep: 23

2

Postato: 12 feb 2017

Opzioni

Vibration doesn't work when the phone is completely assembled.

Hi everybody. I recently changed the LCD screen of my iPhone 5s (third party, works perfectly). When I reassembled the phone, I realized that the vibration was not working. I opened the device again, and realized that the vibration works perfectly as long as the LCD is not completely inserted. As soon as I press the LCD to make it fit into the back case, the vibration stops working. I think it is some kind of contact's fault. Any suggestions? Thanks in advance.

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio 0

Aggiungi un commento

2 Risposte

Soluzione Prescelta

Minho @refectio

Rep: 221,5k

15

290

807

Postato: 12 feb 2017

Opzioni

You probably have some contact or friction between the screen assembly, specifically the camera and sensor housing, and the vibrator. It could be physically obstructing it or causing a bad electrical contact.

Go back though this guide to double check that you have everything properly installed.

Questa risposta è stata utile?

Sì No

Punteggio 3

2 Commenti:

Fixed! It was indeed a mechanical issue, a little part of metal of the front camera housing was pushing on the vibrator. Thanks a lot!

13 feb 2017 da ignitus

My pleasure!

13 feb 2017 da Minho

Aggiungi un commento