Salta al contenuto principale

Introdotto il 19 settembre 2014, questo iPhone con schermo da 4,7" è la versione più piccola dell'iPhone 6 Plus. Identificato dai numeri modello A1549, A1586, and A1589.

4935 Domande Visualizza tutte

Just replaced display w/ full assembly but touchscreen doesn't work.

I just installed my new iPhone 6 LCD Screen Digitizer and Full Screen Assembly.The display (and home button I reinstalled) work great on the new screen...but the touchscreen doesn't respond. I checked the connections and everything is snapped in, but the touchscreen is still unresponsive. Is there anything I can do to fix it? I made sure not to damage any connections during the install. Do you think this replacement part is faulty?

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0

Commenti:

I reinstalled my broken screen and the touchscreen works perfectly, so I know that

1.) I connected it correctly

2.) the problem is not with my phone.

This leads me to believe the part sent to me was faulty. Any thoughts?

da

Yep most likely screen faulty if the previous screen had working touch screen.

da

Aggiungi un commento

1 Risposta

Did a little looksie around iFixit and one solution would be to Hold your Home Button and the Power On-Off sleep button for ten or so seconds. That should restore the Touch, Stabilizer, etc.

If not it could be faulty part but I seriously doubt it is. Apple phone parts are built correct the first time.

Here are three URLs that could also be the problem - and or your solution(s).

Touch ID not working after screen replacement?

http://ifixit.org/blog/8309/iphone-6-plu...

http://macworld.co.uk/how-to/iosapps/wha...

Hope this helps.

Shaun

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

Sarah Rosborough sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 51