Aggiusta la tua roba Comunità Store

Informazioni sulla riparazione e guide per i laptop MacBook Pro 15" Retina dal 2012 in poi.

3609 Domande Visualizza tutte

Opzioni

Hey folks, is this a capacitor? Is it damaged?

Lcd connector on display board is burned on the right side; about 3 pins are damaged.

On the Mobo this Capacitor(?) near connector looks weird...Could it damage a new screen when connecting the same way the old screen connector on display board is damaged?

Block Image

https://picload.org/image/rawgarpl/20170...

Macook fell on the floor; that s the prehistory...

Greetings from germany

Maik

Update (01/04/2017)

Thanks for the fast answer...

820 - 3071 - A

Picture of connector on display board...:

Block Image

https://picload.org/image/rawgacwl/20170...

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 0
1 Commento

maikhuebeler post an image of your complete board with your question. You also want to let us know exactly what model your MBP is. The "A" number is not going to be enough. You will have to be very specific. Your board is most likely (going by my schematic) a 820-3332

da

Aggiungi un commento

2 Risposte

Filtra per:
Più utili Più recenti Più Vecchio
Soluzione Prescelta

Opzioni

No, looks like a ferrite bead. Let us know the board number (should be bottom left on logic board somewhere) and I can let you know the value.

Don't plug a new screen into the damaged LCD connector, this will burn the LCD cable. Replace the LCD connector and the ferrite bead, then try a new screen.

Questa risposta è stata utile?

Sì No
Punteggio 4

4 Commenti:

Ferrite bead is important for screen?

da

Yes, it is for the screen circuit

da

Logic board number?:

C02231601y2dy3va2

2.3 hy 8g hy 1g

da

The board number you have supplied is for the side board (with SD card reader on it), not the main board. There will be a number like this on the main board. Once you find this, Google "*your board number* schematics" and download the board view and schematic. This will allow you to click the component on the board view and find out the value in the schematic.

You will definitely need to replace the LCD connector too, looking at the picture. Don't plug anything in there until this is replaced.

da

Aggiungi un commento

Opzioni

maikhuebeler @reecee is absolutely correct. The part you are referring to is reference designator L9000 which is a 220 Ohm Ferrite Bead in a 0805 package. Something like these should work for your board.

Questa risposta è stata utile?

Sì No
Punteggio 3

2 Commenti:

Great! Can i use any of them? Cant understand the schematics...

da

maikhuebeler yes you can

da

Aggiungi un commento

Aggiungi la tua risposta

maikhuebeler sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 212