Rep: 13
1
1
hi i replaced screen on iphone 7 and after replacement iphone powers up, but there is no display
new lcd is fully working on other phone
lcd screen is genuine from another iphone 7
after connecting lcd connector didnt put any screws or metal plate on connectors for screen and home button ribbon
i used 2 screws and plate for front camera flex
phone is not in dfu mode
any help ??
Questa è una buona domanda?
Rep: 593
6
3
Did plug off the battery during the installation? Otherwise your shorted your backlight circuit.
Questa risposta è stata utile?
Rep: 1,1k
5
2
well there are a number of possibilities but it sounds like one of the connection ports may be corrupted or bent. if the screen works on other phones then check to see if the connection ports on the phone that does not work look exactly the same as the one that does. hopefully it is just a bend that can be adjusted with tweezers. i hope that this helps you and good luck on your repair
Questa risposta è stata utile?
Ultime 24 Ore: 0
Ultimi 7 Giorni: 0
Ultimi 30 Giorni: 0
Tutti i Tempi: 3,305
1 Commento
Your iphone light problem...... you need Check Hardware light Ways. i hope solve 100%
da Free Mobile Solution