RISOLTO: After screen replacement phone won't turn on - iPhone 6

After screen replacement phone won't turn on

Hello

I've replaced the whole display from my Iphone 6. I didn't disconnect the battery, so I put the flex cables in turned my phone on and it worked perfectly, then i wanted to put the metal shield on and afterwards my phone wouldn't turn on anymore. It doesn't find it on iTunes, I tried again and again the cables are in the right positions, the screws where never mixed up or something I also tried the restore mode and dfu mode nothing. When I put my phone on charge it gets warm so I think it's still alive?

Thank you very much for every help!

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio 0

Postato: 8 dic 2016

Opzioni

Based on what you say, it does appear to be related to screwing the bracket back on.

Ideally you should always disconnect the battery but I don't think this is your problem. Even if you didn't mix up the screws, if you over-tighten them you can still cause damage to the logic board.

Try to remove the bracket again and see if the phone works. Inspect the connectors with a magnifying glass or jeweler's loupe.

Get back to us with your observations.

Questa risposta è stata utile?

Sì No

Punteggio 2

1 Commento:

Thank you I will try it!

8 dic 2016 da fnha

Aggiungi un commento

iPhone 6

After screen replacement phone won't turn on

1 Risposta

Aggiungi la tua risposta