Aggiusta la tua roba Comunità Store

Lanciato il 25 settembre 2015. Modello A1687/A1634. Si ripara in modo simile alle generazioni precedenti, richiede cacciaviti e strumenti di apertura. Versioni GSM o CDMA /16, 64, 128 GB / Oro rosa, Oro, Argento, Grigio siderale.

1041 Domande Visualizza tutte

Opzioni

Wi-Fi greyed out, bluetooth not working. Wi-Fi Bluetooth ic bad?

My Wireless is completely "greyed out" and Bluetooth is stuck with "spinning wheel".

In Settings: General>About> Wi-Fi Address shows "N/A". However Bluetooth does list a MAC address. But when I access Bluetooth from main Settings Menu, it keeps giving me the spinning wheel of doom.

Block Image

Block Image

I've seen numerous posts and videos stating that its the Wi-Fi module itself. Have seen some videos completely replacing the chip all-together, and others saying it can be from the soldering coming loose under the chip and to just heat the chip to hopefully resolve faulty/loose soldering.

Can you remove and replace the entire module by re-applying RMA-223 paste? Or do you have to solder the chip back onto the board?

Any suggestions, information, or advice would be greatly appreciated.

Thanks.

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 1
Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio
Soluzione Prescelta

Opzioni

There are a lot of iPhone 6S WiFi complaints on the internet. Have you tried all of the software related solutions before going whole-hog in hardware repair.

Replacing a WLAN/BT IC is not a trivial task. Even Reflowing it can cause all kinds of secondary problems. Unless you know the root problem, I would always suggest a replacement over a reflow (or even a reball). If there is a connection problem underneath the IC between the solder balls and logic board pads, a reflow could help. However, if the IC is actually defective or a solder joint is oxidized (and lead-free solder has a tendency to crack and eventually oxidize) than a reflow will not really solve your problem. The other danger with a reflow is that this type of repair tends to attract heat gun warriors who can apply way too much heat to the logic board and damage it elsewhere.

Replacing the IC with a new one and using more malleable leaded solder will give you a better fix. However, this requires considerable skill and the proper tools.

An iPhone 6S is still a highly valuable device. I'm not sure I would try to fix it with blunt force tools. Sure some people have likely succeeded but I have seen too many devices destroyed by well meaning owners.

I would try all the software solutions first and then look for a qualified repair shop that does micro soldering repairs.

Questa risposta è stata utile?

Sì No
Punteggio 3
Aggiungi un commento

Aggiungi la tua risposta

jarred boggs sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 10

Tutti i Tempi: 3,049