Dim Green Magsafe Caused by Pressure to Logic Board
I have a very unusual issue. I recently bought a new palmrest and trackpad for my MacBook Pro. I believe it was a 2011 palmrest and my computer is a mid 2010 model. So I transferred everything to the new palmrest and booted up. Everything seemed great until I had to charge the MacBook Pro. It wouldn't charge. Dim green light for the magsafe. I tried all the usual solutions. I was able to boot up with the SMC reset, but the battery wasn't getting recognized. Next I thought I would look at the magsafe connector to the logic board. I tried plugging in the magsafe to just the logic board and it worked. The issue was when I put it all back. Same issue. I opened it again, but this time I left the magsafe plugged in so I could see what made it change. I found that whenever there was light pressure to certain parts of the logic board (especially close to the magsafe connector) it would stop charging. Currently it is working, but if I lean on the palmrest too much it stops charging and goes back to a dim green magsafe. Any help would be great.
Thank you!
Questa è una buona domanda?