Salta al contenuto principale

Informazioni e guide di riparazione per i modelli MacBook Pro con display da 13".

9712 Domande Visualizza tutte

keyboard ribbon cable connector clamp is broken

so I'm a dumb dumb and totally broke the clamp on my keyboard ribbon cable connector. I have tried the tape solution with no luck, the whole connector is just crap now. I did purchase a replacement clamp, but it is only a replacement for the front half ( see pictures) has ANYBODY had luck soldering off the front portion of the clamp and replacing it?? if so I would love pictures or videos or just really detailed instructions!!! I have tried searching the web and come up very empty handed. THANK YOU!

[url=https://postimg.org/image/d1y9poxxt/][img]https://s16.postimg.org/d1y9poxxt/IMG_03...[/img][/url]

[url=https://postimg.org/image/to6k2nc7n/][img]https://s21.postimg.org/to6k2nc7n/IMG_03...[/img][/url]

[url=https://postimg.org/image/wfx68o75b/][img]https://s11.postimg.org/wfx68o75b/IMG_03...[/img][/url]

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

1 Risposta

It certainly is replaceable, but you will need a micro-soldering iron and probably a hot air station as well. I would recommend just taking it to a 3rd party repair shop that does MacBook component-level motherboard repair.

Questa risposta è stata utile?

Punteggio 0

1 Commento:

If you're interested in going the DIY route, check out Louis Rossmann on Youtube. He does this of a living and has hundreds of videos.

da

Aggiungi un commento

Aggiungi la tua risposta

jessicabosworth91 sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 119