Black camera after display repair.

Question

iPhone 6s

Lanciato il 25 settembre 2015. Modello A1688/A1633. Si ripara in modo simile alle generazioni precedenti, richiede cacciaviti e strumenti di apertura. Versioni GSM o CDMA /16, 32, 64, 128 GB / Oro rosa, Oro, Argento, Grigio siderale.

2688 Domande Visualizza tutte

Federico Vaccaro @omgplshold

Rep: 25

2

Postato: 14 set 2016

Opzioni

Black camera after display repair.

Hi, i just dropped my 64gb iPhone 6s and broke screen + lcd, when i repaired it my camera started to show a black screen and i'm unable to switch between front/rear cameras and use flash.

I bought a new original apple camera and changed with the old one, it didn't worked,

could the problem be the power management ic of the camera? If the anwer is yes how can i repair it?

Is still the u2301 from iPhone 6?

Thank you in advance for the answers, have a good day.

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio 2

5 Commenti

Was the battery unplugged during the whole process of the repair? If not then you may have shorted the camera ic chip on accident when removing / plugging in the screen ribbon cables.

14 set 2016 da Ben

it was not, i forgot sadly... this is the reason that make me guess is the ic, do you know the exact component name/location on the board? since i'm not able to find it on the net...

14 set 2016 da Federico Vaccaro

Some leads? i have no clue how to repair this :(

15 set 2016 da Federico Vaccaro

I have no info on where it is on the 6s unfortunately.

15 set 2016 da Ben

I will try it hoping is the u2301 even in the 6S model.

U2301 is for the 6 i guess.

15 set 2016 da Federico Vaccaro

Aggiungi un commento

2 Risposte

Was the battery unplugged during the whole process of the repair? If not then you may have shorted the camera ic chip on accident when removing / plugging in the screen ribbon cables. — Ben
it was not, i forgot sadly... this is the reason that make me guess is the ic, do you know the exact component name/location on the board? since i'm not able to find it on the net... — Federico Vaccaro
I will try it hoping is the u2301 even in the 6S model.

U2301 is for the 6 i guess. — Federico Vaccaro

Buddhika Mahesh @buddhikamahesh Rep: 15,1k 13 39 16 · Answer 1 · 2016-09-15T05:40:57-07:00

Risposta Più Utile

Buddhika Mahesh @buddhikamahesh

Rep: 15,1k

13

39

16

Postato: 15 set 2016

Opzioni

Hello Federico Vaccaro,

Inspect whether any component missing the near FPC connector

* Check the IC U2301 output & it should be 2.8V. if it is OK suggesting you to clean the FPC connector on logic board and carefully resolder it (micro soldering skills required)

Hope this answer will help you to fix the camera issue on your iphone. Good luck!

Questa risposta è stata utile?

Sì No

Punteggio 1

3 Commenti:

I will try it hoping is the u2301 even in the 6S model.

15 set 2016 da Federico Vaccaro

Federico. Did you solve the problem. Because I have the same issue.

19 set 2016 da Jchap808

i do too. where do i get replacement IC's for this?

4 nov 2016 da Bev

Aggiungi un commento