Salta al contenuto principale

Nintendo's first 3DS handheld device released February 2011, identified by model number CTR-001.

451 Domande Visualizza tutte

My 3DS screen calibration is off

Hello, I own a 3DS and I have noticed for a while that there was minor calibration defects. Since it was minor (a small patch on the touchscreen that didn't respond) I ignored it. I have noticed since then that the stylus also wouldn't match up exactly to the place I tapped, and so it began to be a bit of a problem. I have tried recalibration in the settings but it doesn't seem to be picking up my taps. I really don't want to get another one because there's a program that shut down in future manufactured 3DS's called Flipnote Studio (animation software) and I was lucky enough to get a copy before it got shut down. Please help as soon as you can

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

1 Risposta

Best bet would be to replace the touch screen since the calibration setting isn't working for you. It's not a terribly difficult replacement but will take a little bit of time and patience. Order a new touch screen off eBay and then follow this guide: Nintendo 3DS Touchscreen Replacement. Good luck!

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

Klay K sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 22

Tutti i Tempi: 1,976