Why the device doesn't turn on with the new display assembly?

Question

iPhone 5

Sesto modello di iPhone Apple, annunciato il 12 settembre 2012. La riparazione si fa in modo simile alle precedenti versioni di iPhone e richiede cacciaviti e strumenti di apertura. Disponibile con tecnologia GSM o CDMA, con 16, 32, o 64 GB, nero o bianco.

2522 Domande Visualizza tutte

Rocco Lorusso @rok

Rep: 33

2

Postato: 4 ago 2016

Opzioni

Why the device doesn't turn on with the new display assembly?

After the display assembly replacement, the device doesn't turn on, but only shows (full screen) the battery (as if it would be out of charge) and the lightning plug icons.

Once I plug it in, only the battery icons remain, and if I disconnect the battery (while the plug is in) it shows the apple logo for a few seconds and then gets shuted down.

Is there something I could try before contact the vendor asking for the replacement?

Thank you all ^^

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio 1

Aggiungi un commento

2 Risposte

Soluzione Prescelta

Klaus Lehmbecker @klausibert

Rep: 79

5

1

Postato: 4 ago 2016

Opzioni

Try disconnecting the battery and reconnecting it again after a few seconds. I had a similar problem and this worked for me.

Questa risposta è stata utile?

Sì No

Punteggio 1

3 Commenti:

Thank you Klaus :) it tooks me a bit more than a few seconds, but it finally works!

I also had to keep it under charge for a few minutes (as suggested by the support).

Btw, thank you again!

6 ago 2016 da Rocco Lorusso

Yeah, usually this means battery is flat or bad contact with both the battery connector and the battery ribbon cable plug itself, replugging it solves this issue most of the time.

6 ago 2016 da Ben

You're very welcome, glad it worked:)

9 ago 2016 da Klaus Lehmbecker

Aggiungi un commento

Thank you Klaus :) it tooks me a bit more than a few seconds, but it finally works!

I also had to keep it under charge for a few minutes (as suggested by the support).

Btw, thank you again! — Rocco Lorusso
Yeah, usually this means battery is flat or bad contact with both the battery connector and the battery ribbon cable plug itself, replugging it solves this issue most of the time. — Ben