Salta al contenuto principale

Modello A1312 / metà 2011 / Processore Core i5 da 2,7 e 3,1 GHz o Core i7 da 3,4 GHz, ID iMac12,2

708 Domande Visualizza tutte

Blown DisplayPort fuse - where to get?

Hi!

I just opened up my iMac 27 and put it back together. When I fired it up I heard a little "pop". Opening it up again, I can see a fuse (?) has melted near by the DP power port:

Block Image

I might have been clumsy and put the cable the wrong way, making the fuse pop.

It seems like it should be replacable with a decent soldering iron. But what fuse is it and where do I buy it?

Thank you in advance

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 1
Aggiungi un commento

1 Risposta

Soluzione Prescelta

ulflundqvist not a fuse but an inductor. That is reference designator L9000 which is a 250 oHm inductor used as a filter. The schematic does not reference the inductance so you will have to do some checking around mouser.com or digikey as well as others.

Block Image

Block Image

Questa risposta è stata utile?

Punteggio 2

4 Commenti:

Order those caps too C9020, C9001 in case they are bad , make sure you order 2 or 3 of each including inductor in in case they fly of the board while your working, then you'll have to wait for more shipping these parts will be relatively inexpensive.

da

Totally agree with John on that one

da

Hard to say but it might just work. Nothing to lose at this point

da

Aggiungi un commento

Aggiungi la tua risposta

ulflundqvist sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 622